LPS 1158: Issue 2.2 Requirements and tests for fire resistant glazing systems This Standard details the technical requirements for the certification of fire resisting glazing. It is applicable to the certification of:-o specific glasses for use in a range of described proprietary and/or generic framing systems;o specific framing systems for use with a described range […]
LPS 1148 : Issue 1.1 Requirements for contractors engaged in the design installation, commissioning and servicing of automatic sprinkler systems
LPS 1148: Issue 1.1 Requirements for contractors engaged in the design installation, commissioning and servicing of automatic sprinkler systems This scheme is open to all Contractors operating anywhere in the World except the UK & Ireland and The Netherlands where LPCB operates different schemes for installers of automatic sprinkler systems.Application forms F360A are available from […]
LPS 1132 : Issue 4.2 Requirements and tests for LPCB approval of wall and floor penetration and linear gap seals
LPS 1132: Issue 4.2 Requirements and tests for LPCB approval of wall and floor penetration and linear gap seals Penetration For the purposes of this document the term “Penetration” means an aperture through a wall of floor for the passage of services. Linear Gap The linear void, not greater than 100mm in width, between or […]
LPS 1048 : Issue 5.0 Requirements for the approval of sprinkler system contractors in the UK and Ireland
LPS 1048: Issue 5.0 Requirements for the approval of sprinkler system contractors in the UK and Ireland The base scope of the LPS 1048 scheme is the design, installation and commissioning of industrial & commercial fire sprinkler systems.Additionally, a Contractor may add to the base scope the design, installation and commissioning of residential & domestic […]
LPS 1039 : Issue 5.2 Requirements and testing methods for automatic sprinklers
LPS 1039: Issue 5.2 Requirements and testing methods for automatic sprinklers Read For full text visit to www.redbooklive.com SPRINKLER TYPES Tests are described in this document for sprinkler types commercially in use. Other types of sprinkler may be submitted for Certification which are not described below, but in that case additional and/or alternative tests may […]
LPS 1040 : Issue 2.3 Requirements and testing procedures for the LPCB approval and listing of wet alarm valve sets
LPS 1040 Issue 2.3 Requirements and testing procedures for the LPCB approval and listing of wet alarm valve sets WET ALARM VALVE SET REQUIREMENTS AND TEST METHODS Wet Alarm Valve A valve that permits flow of water into a wet sprinkler system, prevents reverse flow of water and provides for an alarm under specified flow conditions. […]
LPS 1041 : Issue 1.3 Requirements and testing procedures for the LPCB approval and listing of dry pipe valve sets
LPS 1041: Issue 1.3 Requirements and testing procedures for the LPCB approval and listing of dry pipe valve sets Accelerator A quick opening device which hastens the operation of a dry pipe valve using a mechanical means other than by reducing the system air pressure.Anti-reseat latch Latch mechanism designed to prevent the sealing assembly from […]
LPS 1224 Issue 3.1 equirements for companies providing secure asset registration services
LPS 1224 Issue 3.1 equirements for companies providing secure asset registration services Loss Prevention Standards will be revised by issue of revised editions or amendments. Details will be posted on our website at www.redbooklive.com Access privilege The scope of the secure information and/or areas within the asset registration company’s facilities to which a person is […]
LPS 1223 : Issue 2.3 Requirements and testing procedures for the LPCB certification and listing
LPS 1223 : Issue 2.3 Requirements and testing procedures for the LPCB certification and listing Listed products and services appear in the LPCB “List of Approved Products and Services” which may be viewed on our website: www.redbooklive.com or by downloading the LPCB Red Book App from the App Store (for iPhone and iPad), from Google […]
LPS 1219 : Issue 3.1 Requirements and testing procedures for the LPCB approval and listing of pipe couplings
LPS 1219 Issue 3.1 Requirements and testing procedures for the LPCB approval and listing of pipe couplings TEST PREPARATION AND CONDITIONS Tests shall be carried out using pipe in accordance with ISO 65 medium grade up to DN150, or ISO 4200 with 5.4mm wall thickness, for greater than DN150 up to DN 300. Pipes shall […]